327 lines
9.7 KiB
C
327 lines
9.7 KiB
C
/*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 William D. Jones (thor0505@comcast.net),
|
|
* Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de),
|
|
* Ha Thach (tinyusb.org)
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*
|
|
* This file is part of the TinyUSB stack.
|
|
*/
|
|
|
|
#include "stm32f7xx_hal.h"
|
|
#include "bsp/board.h"
|
|
#include "board.h"
|
|
|
|
//--------------------------------------------------------------------+
|
|
// Forward USB interrupt events to TinyUSB IRQ Handler
|
|
//--------------------------------------------------------------------+
|
|
void OTG_FS_IRQHandler(void)
|
|
{
|
|
tud_int_handler(0);
|
|
}
|
|
|
|
// Despite being call USB2_OTG
|
|
// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port
|
|
void OTG_HS_IRQHandler(void)
|
|
{
|
|
tud_int_handler(1);
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// MACRO TYPEDEF CONSTANT ENUM
|
|
//--------------------------------------------------------------------+
|
|
|
|
UART_HandleTypeDef UartHandle;
|
|
|
|
void board_init(void)
|
|
{
|
|
board_clock_init();
|
|
|
|
// Enable All GPIOs clocks
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
__HAL_RCC_GPIOG_CLK_ENABLE();
|
|
__HAL_RCC_GPIOH_CLK_ENABLE(); // ULPI NXT
|
|
__HAL_RCC_GPIOI_CLK_ENABLE(); // ULPI NXT
|
|
|
|
#ifdef __HAL_RCC_GPIOJ_CLK_ENABLE
|
|
__HAL_RCC_GPIOJ_CLK_ENABLE();
|
|
#endif
|
|
|
|
UART_CLK_EN();
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
// 1ms tick timer
|
|
SysTick_Config(SystemCoreClock / 1000);
|
|
|
|
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
|
// Explicitly disable systick to prevent its ISR runs before scheduler start
|
|
SysTick->CTRL &= ~1U;
|
|
|
|
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
|
NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
|
NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
|
#endif
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
|
|
// LED
|
|
GPIO_InitStruct.Pin = LED_PIN;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
|
|
|
|
// Button
|
|
GPIO_InitStruct.Pin = BUTTON_PIN;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
|
|
|
|
// Uart TX
|
|
GPIO_InitStruct.Pin = UART_TX_PIN;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = UART_GPIO_AF;
|
|
HAL_GPIO_Init(UART_TX_PORT, &GPIO_InitStruct);
|
|
|
|
// Uart RX
|
|
GPIO_InitStruct.Pin = UART_RX_PIN;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = UART_GPIO_AF;
|
|
HAL_GPIO_Init(UART_RX_PORT, &GPIO_InitStruct);
|
|
|
|
UartHandle.Instance = UART_DEV;
|
|
UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE;
|
|
UartHandle.Init.WordLength = UART_WORDLENGTH_8B;
|
|
UartHandle.Init.StopBits = UART_STOPBITS_1;
|
|
UartHandle.Init.Parity = UART_PARITY_NONE;
|
|
UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
|
|
UartHandle.Init.Mode = UART_MODE_TX_RX;
|
|
UartHandle.Init.OverSampling = UART_OVERSAMPLING_16;
|
|
HAL_UART_Init(&UartHandle);
|
|
|
|
#if BOARD_TUD_RHPORT == 0
|
|
// OTG_FS
|
|
|
|
/* Configure DM DP Pins */
|
|
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* Configure OTG-FS ID pin */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_10;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
// Suppress warning caused by mcu driver
|
|
#ifdef __GNUC__
|
|
#pragma GCC diagnostic push
|
|
#pragma GCC diagnostic ignored "-Wshadow"
|
|
#endif
|
|
|
|
/* Enable USB FS Clocks */
|
|
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
|
|
|
#ifdef __GNUC__
|
|
#pragma GCC diagnostic pop
|
|
#endif
|
|
|
|
#if OTG_FS_VBUS_SENSE
|
|
/* Configure VBUS Pin */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
// Enable VBUS sense (B device) via pin PA9
|
|
USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN;
|
|
#else
|
|
// Disable VBUS sense (B device) via pin PA9
|
|
USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
|
|
|
|
// B-peripheral session valid override enable
|
|
USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
|
|
USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
|
|
#endif // vbus sense
|
|
|
|
#else
|
|
// OTG_HS
|
|
|
|
#ifdef USB_HS_PHYC
|
|
// MCU with built-in HS PHY such as F723, F733, F730
|
|
|
|
/* Configure DM DP Pins */
|
|
GPIO_InitStruct.Pin = (GPIO_PIN_14 | GPIO_PIN_15);
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
// Enable HS VBUS sense (B device) via pin PB13
|
|
USB_OTG_HS->GCCFG |= USB_OTG_GCCFG_VBDEN;
|
|
|
|
/* Configure OTG-HS ID pin */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_13;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
|
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
|
|
/* Enable PHYC Clocks */
|
|
__HAL_RCC_OTGPHYC_CLK_ENABLE();
|
|
|
|
#else
|
|
// MUC with external ULPI PHY
|
|
|
|
/* ULPI CLK */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* ULPI D0 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_3;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* ULPI D1 D2 D3 D4 D5 D6 D7 */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_5;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* ULPI STP */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_2;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
|
|
/* NXT */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_4;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
|
|
|
/* ULPI DIR */
|
|
GPIO_InitStruct.Pin = GPIO_PIN_11;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG_HS;
|
|
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
|
#endif // USB_HS_PHYC
|
|
|
|
// Enable USB HS & ULPI Clocks
|
|
__HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE();
|
|
__HAL_RCC_USB_OTG_HS_CLK_ENABLE();
|
|
|
|
#if OTG_HS_VBUS_SENSE
|
|
#error OTG HS VBUS Sense enabled is not implemented
|
|
#else
|
|
// No VBUS sense
|
|
USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
|
|
|
|
// B-peripheral session valid override enable
|
|
USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
|
|
USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
|
|
#endif
|
|
|
|
// Force device mode
|
|
USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD;
|
|
USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
|
|
|
|
#endif // BOARD_TUD_RHPORT
|
|
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// Board porting API
|
|
//--------------------------------------------------------------------+
|
|
|
|
void board_led_write(bool state)
|
|
{
|
|
GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1-LED_STATE_ON));
|
|
HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state);
|
|
}
|
|
|
|
uint32_t board_button_read(void)
|
|
{
|
|
return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
|
|
}
|
|
|
|
int board_uart_read(uint8_t* buf, int len)
|
|
{
|
|
(void) buf; (void) len;
|
|
return 0;
|
|
}
|
|
|
|
int board_uart_write(void const * buf, int len)
|
|
{
|
|
HAL_UART_Transmit(&UartHandle, (uint8_t*)(uintptr_t) buf, len, 0xffff);
|
|
return len;
|
|
}
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
volatile uint32_t system_ticks = 0;
|
|
void SysTick_Handler (void)
|
|
{
|
|
HAL_IncTick();
|
|
system_ticks++;
|
|
}
|
|
|
|
uint32_t board_millis(void)
|
|
{
|
|
return system_ticks;
|
|
}
|
|
#endif
|
|
|
|
void HardFault_Handler (void)
|
|
{
|
|
__asm("BKPT #0\n");
|
|
}
|
|
|
|
// Required by __libc_init_array in startup code if we are compiling using
|
|
// -nostdlib/-nostartfiles.
|
|
void _init(void)
|
|
{
|
|
|
|
}
|